This Copy Of Install Macos Is Too Old

/ Comments off

The other day a co-worker needed to borrow a Mac, so I grabbed an older MacBook Air from storage. I decided to wipe out the laptop’s flash storage and install a fresh version of OS X. I created a bootable USB flash drive installer, plugged it into the laptop, pressed the Option key as the machine booted, and then selected the USB drive as the boot disk.

I wanted to try out the beta for Big Sur, but now I'm stuck. When I download Catalina, I am unable to install it. I get a message that says 'This copy of the macOS Catalina installer application is too old to be opened on this version of macOS.' To get a copy of macOS Mojave to install on an unsupported Mac, you have to be in the Apple Beta program but more importantly than that, you have to download it on a supported Mac. Step 1 How to Install macOS High Sierra. With the device powered off, disconnect any external hard drives and flash drives. Plug in your macOS High Sierra bootable flash drive. Hold down the option or alt (⌥) key on the keyboard and power on the device. When you see the boot selection screen as shown, release the option key. At the prompt, type date to see the date that’s on the Mac.; Figure out the numerical representation of the date and time. The pattern you need to follow: Month: in two-digit format. That utility, along with a USB drive with a capacity of at least 8GB and a copy of Sierra, should let you install macOS on that handful of older devices. All the usual caveats apply: installing.

This

I then ran Disk Utility to reformat the drive and then ran the installer to install OS X. It looked like things were moving along, until this appeared on the screen.

This Copy Of Install Macos Is Too Old

I created another boot disk using a different storage drive, in case it was a hardware problem, but I got the same error. I figured that the fact that the laptop had been in storage for a while had something to do with it, and it did.

Note: This fix should work with OS X Mavericks and El Capitan. It also worked for me with macOS Sierra, which shows a different error message (“The installer payload failed signature check” pops up near the end of the installation) than the one that appears for El Capitan and Mavericks.

How to fix the problem

The installer checks the date on the computer. If the date isn’t current, you get the error above. The fix involves correcting the date on your Mac.

If you have an older OS on the Mac

This Copy Of Install Macos Is Too Old

If you have a complete OS on the Mac already, boot into it. Fix the date in the Date & Time system preference (Apple menu > System Preferences). Reboot using the USB boot disk, and you should be able to proceed with the installation.

If you don’t have an OS on the Mac

If you are in a situation like I was, and you don’t have a complete OS on your disk (you reformatted it), you’ll find that there’s no way to access the Date & Time system preference when you use an external USB boot installer drive. The Apple menu doesn’t give you access to System Preferences. You have to use the Terminal to set the date and time.

If you use an external boot disk, you Mac starts up into OS X Disk Utilities. You can access the Terminal by clicking on the Utilities menu and selecting Terminal. Once the Terminal has launched, follow these steps.

  1. At the prompt, type date to see the date that’s on the Mac. For example, here’s the date of the MacBook Air I worked on.
InstallThis copy of install macos is too older women
  1. If your Mac is connected to the internet, you can tell your Mac to check online for the current date and time. You can do this by typing at the prompt ntpdate -u time.apple.com and then pressing Return.

Your Mac should now have the current date and time. If you enter date again (as I did in the screenshot above) the information that appears will be current. You can now run the OS installer.

If you don’t have an internet connection

You can still use Terminal to set the date. Go into the Terminal as described above, then follow these steps.

  1. At the prompt, type date to see the date that’s on the Mac.
  2. Figure out the numerical representation of the date and time. The pattern you need to follow:
    • Month: in two-digit format. For example, July is 07.
    • Day: in two-digit format. For example, the 19th is 19. Another example: the 7th is 07.
    • Time: in military format of hours and minutes. For example, 2:00 p.m. is 1400.
    • Year: Last two digits.

In my example, the numerical representation is 0719140016. This stands for July (07) 19, (19), 2 p.m. (1400), 2016 (16).

This Copy Of Install Macos Is Too Old To Be

  1. At the prompt, type date [numerical], with [numerical] being the representation you figured out. In my example, I typed date 0719140016. Then press Return.

This Copy Of Install Macos Is Too Older Women

The date should be set. You can check the date again by typing date at the prompt. You can now run the installer.